10 CMX 240 Series Installation Guide
Mounting and Wiring
Figure 1 shows the backplate and the positions of the eyelets for
mounting the CMX 240 series controller.
Warning
Never drill holes in the CMX cabinet or boards. A metal shaving could
easily short circuit the electronics.
1. Pull the cable for a terminal or printer through the opening on the left
side of the cabinet.
2. Pull cables for Infinet through the left side opening.
3. Pull the AC cable through the opening on the top left side of the
cabinet.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
