Andover Controls CMX 240 Series User Manual

CMX 240 Series Installation Guide B-1
Appendix B
Probe Switch Settings
This appendix shows how to set the tank probe DIP switch so that you
can determine the point channel number for each tank probe.
The DIP switch is located inside the probe head. For details on how to
access the DIP switch, refer to the MTS installation guide supplied with
the probe.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com

Andover Controls CMX 240 Series Specifications

General

Brand	Andover Controls
Model	CMX 240 Series
Category	Controller
Language	English