Animo OptiBean - Mixer Cleaning Procedure

EN 36 2011/04
OptiBean
6.2.10 Cleaning the mixer
1 Turn the canister’s outlet upwards.
2 Remove the outlet hose from the mixer.
3 Turn the green mounting ring (C) to the right.
4 Take off the mixer housing (B).
5 Pull off the mixer fan (A).
6 Turn the green mounting ring (A) to the right.
7 Remove the mounting ring.
8 Clean the parts.
9 Remove the dust tray (D).
10 Clean and dry the dust tray.
11 Replace the dust tray.
12 Replace the mounting ring and turn it to the left to lock the
ring into place.
13 Replace the mixer fan. Make sure that the mixer fan locks
into place. The mixer fan must not touch the green mounting
ring.
14 Replace the mixer housing.
15 Turn the green mounting to the left to lock the mixer into
place.
16 Replace the outlet hose.
C
A
B
D