Page 19 of 36
Wall Following: Press and the robot will enter wall following mode
until finished or another button is pressed.
Spot Cleaning: Press and the robot will enter spot cleaning mode
until finished or another button is pressed.
9.1 Battery Installation / Replacement
Note: The Remote control is not supplied with batteries.
To use the first time, you will need to install 2 “AAA” alkaline batteries.
NOTE: Do not dispose of batteries in the rubbish bin. Contact your local
authority for instruction on proper disposal and collection points.
To install / replace the batteries in the remote control, turn the remote control
over so that the back is facing you.
Slide the back cover off to access the battery compartment.
Install / replace with new batteries ensuring the polarity of the batteries match
the polarity marked inside the battery compartment.
Important: Never mix old and new batteries and never mix battery types.
To Next Page
Loading...
