20
Section 5 Remote Control by GPIB
: PATTern: LENGth: DEFined1 <Numeric>
: PATTern: LENGth: DEFined2 <Numeric>
: PATTern: LENGth: DEFined3 <Numeric>
: PATTern: LENGth: DEFined4 <Numeric>
Function ............ The delivery bit length of the free pattern memory Defined: 1 to 4 is set.
Parameter .......... <Numeric> = 2 to 524288
Unit ................... <Non term>
Restriction ......... This cannot be set during the data pattern delivery, but can be set in the idling.
: PATTern: LENGth: IDLE <Numeric>
Function ............ The delivery bit length of the idle pattern memory is set.
Parameter .......... <Numeric> = 2 to 524288
Unit ................... <Non term>
Restriction ......... This cannot be set in the Pattern Generator output ON status.
: PATTern: LENGth: DEFiend1?
: PATTern: LENGth: DEFiend2?
: PATTern: LENGth: DEFiend3?
: PATTern: LENGth: DEFiend4?
Function ............ The delivery bit length of the Pattern Generator free pattern memory Defined: 1 to 4 is inquired.
Response ........... The delivery bit length of the Pattern Generator free pattern memory Defined: 1 to 4
Restriction ......... None
: PATTern: LENGth: IDLE?
Function ............ The delivery bit length of the Pattern Generator idle pattern memory is inquired.
Response ........... The delivery bit length of the Pattern Generator idle pattern memory
Restriction ......... None
: PATTern: DATA: DEFiend1: ERASe
: PATTern: DATA: DEFiend2: ERASe
: PATTern: DATA: DEFiend3: ERASe
: PATTern: DATA: DEFiend4: ERASe
Function ............ The Pattern Generator free pattern memory Defined: 1 to 4 data are erased.
Parameter .......... None
Unit ................... <Non term>
Restriction ......... This cannot be erased during the data pattern delivery but can be erased during idling.
: PATTern: DATA: IDLE: ERASe
Function ............ The Pattern Generator idle pattern memory data are erased.
Parameter .......... None
Unit ................... <Non term>
Restriction ......... This cannot be erased in the Pattern Generator output ON status.