System Configuration
5-16 PN: 13000-00110 Rev. V MT8852B Programming Manual
EUTNAME (EUT User Friendly Name Request)
This command returns the user-friendly name of the EUT if it is available. When a test or
script is run the standard connection procedure requests the user-friendly name. If the
connection has been made using the auxiliary commands the auxiliary user friendly name
command can be used to read the user-friendly name.
EUTRS232 (EUT RS232 HCI Set Up)
This section allows the operator to set the baud rate of the HCI RS232 connection to the EUT.
Query command format SYSCFG?<ws>EUTHANDSHAKE
Response The response is returned in the form of the command to set that
state.
Example SYSCFG? EUTHANDSHAKE
Response If the handshake is disabled the response would be:
SYSCFG EUTHANDSHAKE,NONE
Set command format SYSCFG?<ws>EUTNAME
Response The user friendly name is returned as a text string of up to 248
characters.
Example SYSCFG? EUTNAME
Response The user friendly name is returned as a text string of up to 248
characters. If no user-friendly name is available, the string “not
available” is returned.
Set command format SYSCFG<ws>EUTRS232<,><baud rate>
<baud rate>
1200
2400
4800
9600
19200
38400
57600
115200
230400
460800
921600
Remarks The RS232 HCI link does not at present support the Bluetooth
RS232 protocol negotiation and compression or handshaking.
Example To set the baud rate to 9600 the command would be:
SYSCFG EUTRS232,9600
To Next Page
