Need help?Do you have a question about the Anritsu Network Master Pro MT1000A and is the answer not in the manual?
General| Model | MT1000A |
|---|---|
| Category | Test Equipment |
| Manufacturer | Anritsu |
| Product Series | Network Master Pro |
| Maximum Throughput | 100 Gbps |
| Optical Power Meter | Optional |
| Light Source | Optional |
| External Clock Input/Output | Yes |
| Power Supply | AC Adapter, Battery |
| Type | Portable Tester |
| Interface Types | Ethernet |
| Supported Standards | IEEE 802.3 |
| Display | Color LCD |
| Display Type | TFT |
| Interfaces | USB, Ethernet, Optical |
| OTDR | Optional |
| Storage Temperature | -20 to +60 °C |
| Measurement Capabilities | Ethernet |
Explains the GUI's operating principle, navigation, and screen elements like desktop and workspace.
Covers setting up and viewing the status of SDH interfaces.
Covers setup and status of SONET interfaces.
Covers setup and status for E1 PDH layer.
Covers setup and status for DS1/J1 PDH layer.
Covers setup and status for E3 PDH layer.
Covers setup and status for DS3 PDH layer.
Covers setup and status for E4 PDH layer.
Describes the Automatic Protection Switching (APS) test.
Details the Bit Error Rate Test (BERT) applicable to SDH/SONET/PDH/DSn interfaces.
Describes the Round-Trip Delay (RTD) test for network and equipment delay.
Details the setup and status of Ethernet interfaces.
Details the Bit Error Rate Test (BERT) applicable to Ethernet interfaces.
Details the RFC 2544 benchmarking methodology for network device performance.
Details the RFC 6349 framework for TCP Throughput Testing.
Describes the Service Activation Test methodology per ITU-T Y.1564.
Covers setup and status for OTN interfaces.
Describes the Automatic Protection Switching (APS) test for OTN.
Details the Bit Error Rate Test (BERT) applicable to OTN interfaces.
Describes the Round-Trip Delay (RTD) test for OTN networks.
Covers setup and status for CPRI/OBSAI interfaces.
To Next Page
