Definitions
The selected check boxes correspond to the columns currently shown in the
channels list on the Summary screen.
Statistics
The selected check boxes correspond to the columns currently shown in the
results list on the Summary screen. Note that the check boxes are placed
under categories.
Frame statistics
IP size distribution
MPLS statistics
IP statistics
IPv4 statistics
IPv6 statistics
TCP statistics
UDP statistics
Select/Clear all
To select all check boxes in the dialog box, touch the Select All button.
To clear all check boxes in the dialog box, touch the Clear All button.
6.4.3.2 IEEE1588v2 Log
If Ext. log is selected in IEEE1588v2 screen of Ethernet Frame Setup, the
IEEE1588v2 Log button appears in the navigation area. Refer to IEEE1588v2
Log in "BERT" for the operation.
6.4.3.3 Event Log
Touching the Event Log button in the navigation area displays the screen
providing the event log data. Refer to Event Log of SDH/SONET/PDH/DSn
BERT application.
6.4.3.4 Statistics
Touching the Statistics button in the navigation area displays the screen
providing the statistics data. Refer to Statistics of Mon/Gen for the operation.
The frame count result in the Statistics screen may not match to the result in
the Summary screen, because the measurement start time and the stop time
are different between Summary screen and Statistics screen.
6.5 Mon/Gen
To Next Page
Loading...
