3.1 Touch Screen Display
The 9 inch active TFT display with WVGA resolution (800x480 pixels) is used
for setups and for presentation of results (that is, for all interaction with the
instrument). As the display includes touch screen functionality, it is possible
to navigate and operate directly from it.
The touch screen display is constructed to be operated by the tip of your
finger or by the included Stylus (Anritsu part No. Z1746A). The touch screen
surface is made of delicate material and is easily scratched or damaged if
handled incorrectly.
CAUTION
Never expose the touch screen to excessive pressure as this may
damage its functionality.
Never use sharp objects (e.g. pens, paper clips etc.) to operate the
touch screen, as this may damage the surface.
If the touch screen breaks and liquid leaks out, DO NOT touch or
ingest the liquid and avoid getting it in your eyes. The liquid may be
poisonous.
Only use a soft cloth moisturized with a mild detergent to clean the surface
of the touch screen. Be sure to power off and disconnect main power
adapter.
3.2 Key Operation
To Next Page
Loading...
