Threshold
Measurement period
Select the measurement period from 0.5 seconds to 10 seconds.
5.10.2.2 Threshold
Touching the Threshold button in the navigation area displays the following
items.
Maximum limit
Allows you to specify a threshold value of RTD in micro seconds (μs).
5.10.3 Test Results
5.10.3.1 Summary
Touching the Summary button in the navigation area will display the screen
shown below.
This screen presents a summary of the RTD test results, for all of the ports
included in the test. For each port, the information consists of:
Measurement count
Minimum, average, and maximum round-trip delay times in micro
seconds
Threshold value
5.10.3.2 Detailed
Touching the Detailed button in the navigation area will display the screen
shown below.
To Next Page
Loading...
