Need help?Do you have a question about the Anritsu MT8852B and is the answer not in the manual?
General| Product Type | Bluetooth Test Set |
|---|---|
| Bluetooth Version | Bluetooth 5.0 |
| Maximum Output Power | +20 dBm |
| Bluetooth Testing | Yes |
| WLAN Testing | No |
| Modulation Types | GFSK, π/4 DQPSK, 8DPSK |
| RF Output Power | Up to +20 dBm |
| Measurement Speed | Fast |
| Interface | USB, LAN, GPIB |
| Power Supply | 100 V to 240 V AC |
| Supported Standards | Bluetooth Low Energy |
Provides an overview of the manual, product description, and related software.
Explains the Bluetooth technology, SIG, qualification process, and test modes.
Covers operating environment, power requirements, unpacking, and initial setup.
Details the front panel layout, keypad, display, icons, and rear panel.
Explains what scripts are, how to select, configure, name, lock, and unlock them.
Covers acquiring Bluetooth address and preparing for low energy tests.
Details how to run scripts in standard mode and supported tests.
Explains single payload mode, its supported tests, and how to perform tests.
Details null packet mode, supported tests, and test procedures.
Provides instructions for running individual tests without a script.
A reference guide to configuring various settings and features of the MT8852B.
Explains how to set up the MT8852B as a Bluetooth interferer.
Details how to perform continuous wave (CW) measurements.
Covers performing audio measurements using SCO links.
Explains Adaptive Frequency Hopping (AFH) and its configuration.
Details the IQ data output software and EDR measurements.
Provides information on contacting support, reporting problems, and service centers.
Lists the detailed technical specifications of the MT8852B.
Details the test conditions used for various measurements.
Lists the default settings for various parameters.
Provides explanations for common error messages.
Illustrates the decision processing for determining bit and frame error rates.
Defines commonly used acronyms and terminology.
Provides guidelines for handling and caring for connectors.
Shows the packet formats used in low energy tests.
To Next Page
