Testing in Null Packet Mode Running a Script in Null Packet Mode
9-6 PN: 13000-00205 Rev. N MT8852B Operation Manual
Initial Carrier Test
The initial carrier test performs a frequency accuracy test on Null packet transmitted from
the EUT.
The table below details the test conditions and the associated default settings. Permitted
variations from the default setting are detailed in the “User Range” column.
Results
1. Position the cursor at "Init carrier" in the Script menu.
2. Press the [Results] soft key.
Figure 9-7. Initial Carrier Test
Table 9-4. Initial Carrier Test Conditions
Parameter Default value User Range
Hopping test mode Defined Defined, All, Any
Number of packets 10 1 to 10,000
To Next Page
Loading...
