Safety-2
Safety Symbols
To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu
Corporation uses the following safety symbols to indicate safety-related information. Ensure
that you clearly understand the meanings of the symbols BEFORE using the equipment.
Some or all of the following symbols may be used on all Anritsu equipment. In addition, there
may be other labels attached to products that are not shown in the diagrams in this manual.
Symbols Used in Manuals
Safety Symbols Used on Equipment and in Manuals
The following safety symbols are used inside or on the equipment near operation locations to
provide information about safety items and operation precautions. Ensure that you clearly
understand the meanings of the symbols and take the necessary precautions BEFORE using
the equipment.
This indicates a very dangerous procedure that could
result in serious injury or death if not performed properly.
This indicates a hazardous procedure that could result in
serious injury or death if not performed properly.
This indicates a hazardous procedure or danger that could
result in light-to-severe injury, or loss related to equipment
malfunction, if proper precautions are not taken.
This indicates a prohibited operation. The prohibited operation is indicated
symbolically in or near the barred circle.
This indicates a compulsory safety precaution. The required operation is indicated
symbolically in or near the circle.
This indicates a warning or caution. The contents are indicated symbolically in or
near the triangle.
This indicates a note. The contents are described in the box.
These indicate that the marked part should be recycled.
To Next Page
Loading...
