Unpacking the Product Preparation for Use
3-2 PN: 13000-00205 Rev. N MT8852B Operation Manual
3-3 Unpacking the Product
1. Inspect the shipping container for signs of damage. If the container is damaged, or if
the cushioning material shows signs of stress, notify the carrier and your Anritsu
Customer Service Center. Retain the shipping materials for inspection.
2. Check the contents of the shipment against the list of shipped items (detailed below).
Notify your local sales representative or Anritsu Customer Service Center if anything
is missing or damaged. Retain all damaged items for inspection.
3. Check the instrument for mechanical and electrical operation. If the MT8852B is
damaged mechanically, notify your local sales representative or Anritsu Customer
Service Center.
Package Contents
The MT8852B is shipped with the following items. Check that all items are present, and
contact Anritsu if they cannot be found.
Table 3-1. Package Contents
Item Quantity
RS 232 HCI control interface lead 1
USB HCI control interface lead 1
RS 232 cable for firmware updates 1
Power cord for destination country 1
Certificate of calibration 1
3.5 mm jack plugs. Audio versions only 3
CD containing:-
MT8852B Operation Manual 1
MT8852B Remote Programming Manual 1
BlueTest2 Operation Manual 1
BlueTest2 software 1
BlueSuite software (standard version) 1
To Next Page
Loading...
