MT8852B Operation Manual PN: 13000-00205 Rev. N 1-1
Chapter 1 — General Information
1-1 About this Manual
This manual provides information on the following model types:
• MT8852B Bluetooth Test Set (with EDR and Audio)
• MT8852B-040 Bluetooth Test Set (without EDR or Audio)
• MT8852B-041 Bluetooth Test Set (without EDR but with Audio)
• MT8852B-042 Bluetooth Test Set (with EDR but without Audio
• MT8852B-043 Bluetooth Test Set for low energy tests only (without BR, EDR, or Audio)
Explanations in this manual apply equally to all of the above model types unless otherwise
stated.
Comments on this Manual
Every effort has been made to ensure that this manual is thorough, easy to use, and free from
errors. However, to ensure continued improvement, we would welcome your comments on
this, or any other Anritsu document.
Please contact us at the address below if you have any comments, good or bad, find any errors
or omissions, or have any suggestions on how our documentation could be improved further.
bluetooth.support@anritsu.com
Your comments will be logged and reviewed, and whenever possible, will be reflected in a
subsequent release of the document.
Software Versions
This document provides information on the following software versions:
MT8852B: 5.00.001
MT8852B-040: 5.00.001
MT8852B-041: 5.00.001
MT8852B-042: 5.00.001
MT8852B-043: 5.00.001
Some of the features documented in this manual may not be available to users of software
releases prior to 5.50.000. Check the version of software by following the procedure below.
1. Turn on the MT8852B and press .
2. Use the arrow keys to position the cursor at "MT8852B" and press .
3. Use the arrow keys to position the cursor at "Identity" and press .
4. Check the number that displays to the right of "Version".
To Next Page
Loading...
