10-4 :FETCh Subsystem Chapter 10 — GSM Commands
10-8 PN: 10580-00341 Rev. C MS2720T PM
:FETCh:SPECtrum:SINGle?
Title: Fetch Single Channel Spectrum
Description: Returns the most recent Single Channel Spectrum measurement
results. The Single Channel Spectrum measurement must be the active
measurement. The current measurement can be queried using
CONFigure?. Use the CONFigure:SPECtrum:SINGle command to set
Single Channel Spectrum as the active measurement.
Data is returned as 9 comma-delimited values.
Related Command: MEASure:PVTSlot?
:CONFigure:PVTSlot
READ:PVTSlot?
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
