ANSIMAG K+1516 - PART LIST 3: ANSI Pump IEC Drive End Parts (Contd)

50
PARTS LIST 3 (Cont’d)
DRIVE END PARTS ONLY – ANSI PUMPS WITH IEC MOTORS
PART NAME Qty K+1516 K+3156 K+326s K+326 K+436 K+1518 K+3158
24 Hex Bolts (Motor Mounting
Plate/Motor)
4
80, 90 frame HHM10X25
100,112 frame HHM12X25
132 frame HHM12X30
160 frame HHM16X40
25 Jack Screws M12
2 HHM12X40FT
26 Lock Washers M12 (Bracket
– Motor Mounting Plate)
4 HLM12
33 Pump Casing Riser
1
80, 90, 100, 112 frame N/A
132 frame K2306 N/A K2306 N/A
160 frame K2306 N/A K2306 N/A
34 Foot Riser
1
80, 90, 100/112 frame RK5000 N/A RK5000 N/A
132, 160 frame N/A N/A N/A N/A
35 Hex Bolts M12 (Bracket-
Bracket Foot)
3
89, 90, 100/112 frame HHM12X25 HHM12X40 HHM12X25 HHM12X40
132, 160 frame HHM12X40 HHM12X40 HHM12X40 HHM12X40
37 Lock Washers M12 (Bracket-
Bracket Foot)
3 HLM12
52 Hex Bolts ½” (Casing –
Casing Riser)
2
80, 90, 100/112 frame N/A N/A N/A N/A
132 frame HH1/xX1.5 N/A HH1/2X1.5 N/A
160 frame HH1/2X1.5 N/A HH1/2X1.5 N/A
53 Hex Bolts ½” (Casing –
Casing Riser)
132 frame HN1/2 N/A HN1/2 N/A
160 frame N/A HH1/2X1.5 N/A
54 Lock Washers M12 (Casing –
Casing Riser)
2 HL1/2
73 Bracket Plug, Drain
1 K3902