Anslut 417061 - Replacing the Batteries; Temperature Display

EN
91
REPLACING THE BATTERIES
The remote control has two batteries (R03) under a
cover on the back.
1. Open the battery cover.
2. Remove the old batteries and insert new
batteries with the correct polarity.
3. Replace the battery cover.
NOTE: All programs are deleted when the batteries
are taken out and the remote control must be
programmed again.
IMPORTANT:
• Do not mix old and new batteries, or dierent
types of batteries.
• Remove the batteries if the appliance is not
going to be used for 2 months, or more.
• Recycle used batteries in accordance with local
regulations.
TECHNICAL DATA
Model RG51B1/(C)EU, RG51B14/(C)E, RG51B31/(C)E
RG51B/(C)EU, RG51B16/(C)E, RG51B31/(C)EU
RG51B17/(C)EU, RG51B18/(C)E, RG51 B32/(C)EU
RG51B19/(C)E-M, RG51 B20/(C)E, RG51 B30/(C)EU
RG51B25/(C)E, RG51 B26/(C)EU, RG51 B27/(C)E,
RG51B30/(C)E.
Rated voltage 3.0 V (batteries R03)
Lowest voltage at which a signal can be given 2.0 V
Range 8 m
Operating temperature -5 to 60°C
TEMPERATURE DISPLAY
Degrees Celsius (°C): RG51B14/(C)E, RG51B16/(C)E, RG51B18/(C)E, RG51B31/(C)E, RG51B19/(C)E-M,
RG51B20/(C)E, RG51 B25/(C)E, RG51 B27/(C)E, RG51 B30/(C)E.
Degrees Fahrenheit (°F): RG51B/(C)EU, RG51B1/(C)EU, RG51B17/(C)EU, RG51B26/(C)EU, RG51B30/(C)EU,
RG51B32/(C)EU, RG51B31/(C)EU.