Anslut 417061 - OPERATION MODES; Cooling Mode; Heating and Fan Modes; Dry and Auto Modes

EN
107
OPERATION
COOLING MODE
• Press the MODE button repeatedly until the COOL status light goes on.
• Set the required room temperature (set point temperature) with the + and - buttons. The temperature
can be set from 17 to 30°C or from 62 to 88°F.
• Press the FAN SPEED button to set the fan speed.
HEATING MODE
(
NOT ON MODELS THAT ONLY HAVE COOLING
)
• Press the MODE button repeatedly until the HEAT status light goes on.
• Set the required room temperature (set point temperature) with the + and - buttons.
The temperature can be set from 17 to 30°C or from 62 to 88°F.
• Press the FAN SPEED button to set the fan speed. On some models the fan speed cannot be set in
HEATmode.
DRY MODE
• Press the MODE button repeatedly until the DRY status light goes on.
• In this mode it is not possible to adjust the set point temperature or fan speed. The fan motor runs at
low speed.
• Keep doors and windows closed for best dehumidication function.
• Do not lead the hose through the window.
AUTO MODE
• In AUTO mode the appliance runs in cooling or heating mode (not on models that only have cooling)
or fan mode only, depending on the room temperature the set point temperature.
• The appliance automatically maintains the room temperature close to the set temperature.
• In AUTO mode it is not possible to set the fan speed.
NOTE: In AUTO mode both the status light for AUTO mode and the status light for the actual mode go on.
FAN MODE
• Press the MODE button repeatedly until the FAN status light goes on.
• Press the FAN SPEED button to set the fan speed. It is not possible to set the temperature.
• Do not lead the hose through the window.