Anviz VP30 User Manual

4.5 System Settings
Click the icon on the top left corner, the menu pops up as follows:
4.5.1 Basic Parameter Settings
Click the [Basic Parameter Setting]. The [Basic Parameter Setting] pops up:
Com Port Communication delay time (1-5) sec.: The default time is 3s.
Network Communication delay time (1-20) sec.: The default time is 5s.
□ Communication failed, automatically exit current operation: If timeout is larger
than ‘Communication delay time’, software will automatically exit.
□ In real-time monitoring, voice prompts ‘Department name’: During real-time
monitor, if staff is access granted, the software will voice prompt staff department and
name.
□ Clear the data after downloading: After downloading records completed, delete
57

Anviz VP30 Specifications

General

Model	VP30
Device Type	IP Access Controller
Fingerprint Sensor	Optical Sensor
Communication	TCP/IP, RS485
Card Capacity	10, 000
Fingerprint Capacity	3, 000
Logs Capacity	100, 000
User Capacity	3, 000
Transaction Capacity	100, 000
RFID Card	125kHz EM card
Voice Output	Yes
Humidity	20% to 80%
Identification Mode	Fingerprint, Card, Password
Access Control Interface	Exit Button, Door Sensor
Relay Output	1
Power Supply	DC 12V
Dimensions	180 x 130 x 40 mm