AnyTone D868UV - Analog Channel Codes and TX Power

Professional
FM Transceiver
33
Set up the CTCSS/DCS code for the RX.
4.RTCDT – for analog channel only
Set up the CTCSS/DCS code for both TX and RX
CTCSS code: 62.5Hz~254.1Hz, total 51groups
DCS code: 000N~7771, total 1024groups
5.TX Power
Set up the TX power for current channel
6.Tone Dec – for analog channel only
Allow set up DTMF/5TONE/2TONE encode and decode for the analog channel.
7.Signal – for analog channel only
When the analog channel set up both CTCSS/DCS decode and optional signaling, you can set up
the RX condition in this menu.
SQ: You can hear the call once the channel receive matched carrier.
CDT: You can hear the call when the channel receive matched CTCSS/DCS signal
TONE: You can hear the call when the channel receive matched signaling.
C&T: You can hear the call when the channel receive matched CTCSS/DCS and matched signaling.
C|T: You can hear the call when the channel receive matched CTCSS/DCS or matched signaling.
8.Band Width – for analog channel only
Choose wide band or narrow band for the channel.
9.REV– for analog channel only