AnyTone SMART - Radio Operation Guide; Power, Volume, and Channel Control; Squelch and ASQ Settings

Squelch Level Control (O.F to 2.8 level available)
ASQ Control(A.1-A.9 level available)
Short press
1.
, until LCD displays SQ and then displays X.X,
X.X stands for SQ level, the bigger value stands for high squelch
level.
Short press [
2.
UP ] or [ DN ] to change SQ level.
Hold [
3.
UP ] or [ DN ] can fast change SQ level.
Hold
4.
or wait for 3 seconds to store and exit.
Hold
1.
key, until LCD displays AQ, the ASQ function turned
on. The LCD will displays "A.X", "X" stands for the ASQ level.
Short press microphone [
2.
UP ] or [ DN ] to change SQ level
Hold microphone [
3.
UP ] or [ DN ] can fast change ASQ level.
Hold
4.
or wait for 3 seconds to store and exit.
Channel Control
Short press [
1.
UP ] or [ DN ] to change working channel.
Hold [
2.
UP ] or [ DN ] can fast change working channel.
HOW TO USE THIS RADIO
Power On/Off the radio
Volume Control
Turn VOL switch clockwise to power on the radio, the LCD
1.
displays the Norms and then displays channel number.
Turn VOL switch anti-clockwise, until hear Ka Ta, the radio is
2.
powered off.
Turn clockwise to increase volume, anti-clockwise to decrease volume.