AnyTone SMART - Mode, RF Gain, and Scan Functions; Emergency Channels and Keypad Lock

Mode Control
Note：When RFG function is on, the LCD displays R. If RFG level is
6 means the attenuation is 6dBm.
Note：In lock Mode all keys except PTT is valid.
Short press
1.
key to switch between AM /FM mode.
The LCD displays the selected mode.
2.
Scan Function
RF Gain Control
Emergency Channel
Keypad Lock
Hold
1.
to start scan function, "SC" falshes in the LCD;
Press [
2.
UP ] or [ DN ] to change scan direction during scan;
Press
3.
or [PTT] key to exit scan function.
Short press
1.
key, LCD displays R and the present RF
gain level ashes.
Short press microphone [
2.
UP ] or [ DN ] to change level.
Short press
3.
key to exit RF gain level control.
Short press
1.
key to choose CH9, the channel number ashes.
Short press
2.
key again to choose CH19, the channel number
ashes.
Short press
3.
key third time to return to last normal channel.
Hold
1.
key for over 2 seconds to lock the keys, LCD
displays "LC".
Hold
2.
key for over 2 seconds again to unlock the keys,
LCD displays OF.