AODELAN E2 - Page 18

5. Press the Energy Adjustment Button [6]
to increase or decrease the ash output
energy.

<+> represents increase.

<
-
> represents decrease.

Short press Energy Adjustment
Button (< 2 seconds) to adjust the
ash output energy level in 1/10 f-stop
increments.

Long press Energy Adjustment
Button (> 2 seconds) to adjust the
ash output energy level in 1 f-stop
increments.

If the energy level of any ash light in
the group is in maximum or minimum
position, all energy levels will remain
unchanged. **
** See section
Command Conrmation
.
• 17 •