V. Operating Instructions
Precautions for Use
Before starting all of the following
operations, please turn off E2 as well as
the camera and ash lights which work
with E2, and turn on all units after the
connection is completed.
Unless Relay State is specially
mentioned; E2 is in Normal Transmit
Mode or Receive Mode under Standard
State by default in all of the following
operations, Mode Indicator [7] blinks
green.
E2 standard packaging is only equipped
with one ash sync cable (3.5mm –
3.5mm plug); the other cables involved
in the following operations are sold
separately.
• 23 •
To Next Page
Loading...