Auto Power Off
1. When E2 is turned on, press the Power
Button [9] and the Command Indicator
[10] blinks one time (lights up for approx.
0.3 seconds), indicating that the Auto
Power Off functionality is enabled, the
E2 is automatically turned off after 30
minutes of inactivity.
2. When E2 is turned on, press the Power
Button [9] and if the Command Indicator
[10] lights up for approx. 2 seconds,
indicating that the Auto Power Off
functionality is disabled, the E2 will
remain on until the battery is exhausted.
• 21 •
To Next Page
Loading...