AODELAN E2 - Beep

Beep
1. Press the Beeper Button [13] to turn on
or off the E2 button beep.

There will be no beep when pressing
the Beeper Button [13] to turn off the
beeper.

There will be a long beep when
pressing the Beeper Button [13] to
turn on the beeper.
2. There will be a long beep when E2 is
turned on regardless of whether the
beeper is turned on or not.
3. Some functions are not supported in
certain modes; there will be no beep
when the corresponding button is
pressed even if the beeper is turned on.
For example, functions of energy
adjustment, model control and etc. are
not supported when the E2 is in Receive
Mode, there will be no beep when the
Energy Adjustment Button [6] or Model
Control Button [12] is pressed.
• 20 •