AODELAN E3+ - Wireless Flash Shooting: Radio Transmission

18
Note:
1) The display will show only the settings currently applied.
2) The functions displayed above function buttons 1 to 4, such as
and , change according to the settings’ status.
3) When a button or dial is operated, the LCD panel illuminates.
IV. Wireless Flash Shooting: Radio Transmission
Note:
The transmitter attached to the camera is called the master unit, and a ash
that is wirelessly controlled is called the slave unit.
Wireless Flash Shooting
Using a transmitter and Canon Speedlites compatible with radio transmission
wireless shooting makes it easy to shoot with advanced wireless multiple ash
lighting, in the same way as normal E-TTL II/E-TTL auto ash shooting.
The settings of the transmitter attached to the camera (master) are
automatically reected on the ash that is wirelessly controlled (slave).
Therefore, you do not need to operate the slave unit while shooting. You can
then perform wireless E-TTL II/ETTL autoash shooting just by setting the
master unit to ETTL mode.
You can choose to perform autoash shooting using one slave unit only, or
perform wireless multiple ash shooting using two or more(up to 15) slave
units.