AODELAN E3+ - 4 ETTL: Wireless Multiple Flash Shooting with Flash Ratio

28
3.3 Press function button 2 will disable .
4. FEL: FE Lock
FE (Flash Exposure) lock locks the correct ash exposure setting for any part
of the scene. Perform FE lock by operating the camera. For the operation,
see the camera and ash’s instruction manual.
5. About Master Units
You can use two or more master units (master units + slave units = maximum
of 16 units). By preparing multiple cameras with master units attached, you
can shoot by changing cameras while keeping the same lighting (slave
units).
Note that when using two or more master units, the color of the <
>
lamp varies depending on the order in which the power was turned on. The
rst master (main master) is green and the second subsequent masters (sub
masters) are orange.
ETTL: Wireless Multiple Flash Shooting with Flash Ratio
1. Autoash shooting with Two Slave Groups
You can divide the slave units into two ring groups A and B, and adjust
the lighting balance (ash ratio) for shooting. The exposure is controlled
automatically so that the total ash output of ring group A and group B
results in the standard exposure.
1.1 Set the ring group of the slave units
Operate and set the slave unit group one by one. Set one unit to<
>,
and set the other to < >. For the slave unit settings, see the ash or