AODELAN E3+ - 5 M:wireless Multiple Flash Shooting with Manual Flash Output

32
units are controlled as a single ring group A with a large ash output.
M: Wireless Multiple Flash Shooting with Manual Flash
Output
When doing multiple ash shooting with manual ash output, you can shoot
with a different ash output setting for each slave unit (ring group). Set all the
parameters on the master unit.
1.Press < > button to set the ash mode to < >.
2.Set the number of ring group:
While
is displayed, press function button 2 corresponding to
to set the groups to re. The setting changes as follows each time pressing
the button: ALL( ) A/B( ) A/B/C( ).
3.Select a firing group: Press function button 3 corresponding to
,