31
Press function button 3 corresponding to , turn < > and press
function button 3 corresponding to
. Again turn < > and press
<
> button to set the ash exposure compensation amount for group C.
Press function button 4 corresponding to
to return to shooting-
ready state.
3. Slave Group Control
If you need more ash output or wish to perform more sophisticated
lighting, you can increase the number of slave units. Simply set an
additional slave unit to the ring group (A, B or C)whose ash output you
want to increase. You can increase the number of slave units up to 15
units in total.
For example, if you set a ring group with three slave units to A, the three
C
A:B
To Next Page
Loading...
