AODELAN E3+ - M: Wireless Multiple Flash Shooting with Manual Output

30
1.4 Take the picture: the slave unit ash at the set ash ratio.
2. Autoash Shooting with Thee Slave Groups
You can add ring group C to ring groups A and B. C is convenient to set
lighting so as to eliminate the subject’s shadow. The setting method is the
same as “Autoash Shooting with Two Slave Groups”
At the ratio mode
, group A and B can be set by flash ratio.
Group C is independent with its ash output level assigned by the camera.
2.1 Set a ash as ring group C: For the slave unit settings, see the ash’s
instruction manual.
2.2 Press the master unit’s function button 4 to display . Press
function button 2 corresponding to to set to < >
2.3 Set ash exposure compensation as required
A B