AODELAN E3+ - Gr: Shooting with Different Flash Modes per Group

33
turn< > to select the group for which you want to set the ash output, and
press <
> button.
4.Set the ash output: Press function button 3 , turn < >to set the ash output and
press <
> button. Repeat step 3and 4 to set the output of all groups.
5.Take the picture: Each group res at the set ash output.
MULTI: Stroboscopic Flash
Stroboscopic flash is an advanced manual flash shooting method. When using
stroboscopic flash with a slow shutter speed, you can shoot multiple successive
movements within a single picture, similar to stop-motion pictures. In stroboscopic
ash, set the ash output, number of ashes, and ash frequency (number of ashes
per second = HZ).