AODELAN E3+ - Page 47

45
Custom Functions Chart
Custom
Function No.
C.Fn 01
C.Fn 02
C.Fn 03
C.Fn 04
Functions
: Auto IDLE
Modeling flash
:
FEB auto cancel
: FEB
sequence
Setting No. Setting and descriptions
Enable Auto IDLE when the E3
+
transmitter is not operated for 5min.,
Disable Auto IDLE when the E3
+
transmitter is not operated for 5min.,
Press the camera’s depth-of-field
preview button to fire the modeling flash
Press E3
+
transmitter’s test flash button
to fire the modeling flash
Enable: Set to automatically cancel FEB
after shooting three shots with FEB
Disable: Set not to automatically cancel
FEB after shooting three shots with FEB
Set the order of FEB sequence as following:
0: Standard exposure
- : Decreased exposure（darker）
+ : Increased exposure（brighter）
Set the order of FEB sequence as following:
- : Decreased exposure（darker）
0: Standard exposure
+ : Increased exposure（brighter）
Disable the modeling flash
Press the camera’s depth-of-field
preview button or E3
+
transmitter’s test
flash button to fire the modeling flash
C.Fn 07
:Test
firing with
autoflash
Set the flash output as 1/32 when firing the
test flash in E-TTL II/E-TTL autoflash
Set the flash output as 1/1 when firing the test
flash in E-TTL II/E-TTL autoflash