TYPICAL
1.Shift Lever
L: Low Gear
H: High Gear
N: Neutral
R: Reveres
P: Park
The vehicle must be stopped and
brakes applied prior to selecting any
gear.
This gearbox is not designed to shift
while vehicle is moving.
Low Gear
This position selects the low speed
range of the gearbox. It allows the
vehicle to move slowly with
maximum torque at the wheels.
NOTE: Use the low speed range
to pull a trailer, carry heavy cargo,
go over obstacles or drive uphill and
downhill.
High Gear
This position selects the high speed
range of the gearbox. It is the normal
driving speed range. It allows the
vehicle to reach its maximum speed.
Neutral
The neutral position disengages the
gearbox.
Reveres
The reverse position allows the
vehicle to go backwards.
When driving downhill in reverse,
gravity can increase the vehicle
speed above the set limited reverse
speed.
Park
The park position locks the gearbox
to help prevent vehicle movement.
Always use the PARK (P) position
when the vehicle is not in operation.
The vehicle can roll if the shift lever
is not set to P (PARK).
To Next Page
Loading...