Grip the steering wheel with both
hands, without having thumbs rolled
around the steering wheel.
NOTE: Under rough trail conditions
or when crossing an obstacle, the
steering wheel could suddenly jerk
on one side, causing hand or wrist
injuries if the thumbs are rolled
around the steering wheel.
(2) Accelerator Pedal
The accelerator pedal is located on
the right side of the brake pedal.
The accelerator pedal controls the
engine speed.
TYPICAL
1. Brake pedal
2. Accelerator pedal
To increase or maintain vehicle
speed, press on the accelerator
pedal with your right foot.
To decrease vehicle speed, release
the accelerator pedal.
The accelerator pedal is spring
loaded and should return to rest
position (idle) when not pressed.
NOTE: The accelerator pedal should
never be disassembled.
(3) Brake Pedal
The brake pedal is located on the left
side of the accelerator pedal.
The brake pedal function is to slow
down or stop the vehicle.
TYPICAL
1. Brake pedal
2. Accelerator pedal
To decrease vehicle speed or to stop
vehicle, press down the brake pedal
with your right foot.
The brake pedal is spring loaded and
should return to rest position when
not pressed.
(4) Shift Lever
The shift lever is located on the
upper console to the right of steering
wheel.
The shift lever is used to change the
gearbox position.
To Next Page
Loading...