SECONDARY CONTROLS
NOTE: The functions of the vehicle you purchased may be slightly different
from the functions shown in the pictures in this manual, please refer to the
actual functions of the vehicle you purchased.
TYPICAL - SECONDARY CONTROLS
(1) Ignition Switch and Keys
Ignition Switch
The ignition switch is located on the
upper console area.
1. Ignition switch
The ignition switch is a three-position,
key-operated switch. The key can be
removed from the switch when it is in
the OFF position.
The engine is off. Electrical
circuits are off, except Acc 12V.
Electrical circuits are on.
Electrical equipment can be
used.
Turn the key to the START
position to engage the electric
starter. The key returns to the ON
position when released.