Fueling Procedure
Fuel is flammable and explosive
under certain condition.
Never use an open flame to check
fuel level.
Never smoke or allow a flame or
spark in the vicinity,
Always work in a well-ventilated
area.
NOTE: Always clean the surrounding
of the fuel cap of any debris, dust,
sand to avoid contaminating fuel.
1.Stop engine
Always stop engine before refueling.
2.Do not allow anyone to remain
seated on the vehicle while fuelling.
3.Slowly unscrew fuel tank cap
counterclockwise to remove it.
If a differential pressure condition is
NOTE: d (whistling sound heard when
loosening fuel tank cap) have vehicle
inspected and/or repaired before
further operation.
4. Insert the spout in the filler neck.
5. Pour fuel slowly to allow time for
the air in the tank to escape and
prevent fuel flow back. Be careful not
to spill fuel.
6.Stop fuelling when the fuel reaches
the bottom of filler neck. Do not
overfill.
Always wipe off any fuel spillage from
the vehicle
7.Fully tighten fuel tank cap
clockwise.
1. Fuel tank cap
To Next Page
Loading...