(11)Cargo box lighting
At night, when the cargo box lighting
is turned on, you can better observe
the situation inside the cargo box.
(12) USB port
A serial bus standard with external
devices is also a technical
specification for input and output
interfaces.
1.Rotate the fan control switch
2.A/C switch
3. Rotating the temperature control switch
(13) Rotate the fan control
To operate the cab heater, rotate the
fan control 1 to the desired fan
speed setting. The far left setting
turns the fan off.
(14)A/C switch
Press the top of the A/C switch 3 to
enable the air conditioning system
for cooling or defrost purposes.
(15)Rotary temperature
control
Adjust the temperature by rotating
the temperature control 2 to the
desired heat setting. Rotate the
control clockwise to increase heat or
counterclockwise to decrease heat.
(16) Multifunction gauge
This vehicle is equipped with an
electronic multifunction gauge.
1. Speed meter indicator
2. Check engine indicator
3. Headlight indicator
To Next Page
Loading...