Do you have a question about the AOpen B2945 and is the answer not in the manual?
Guidance on battery use, replacement, and disposal following manufacturer recommendations and local regulations.
Precautions for Class 1 laser products, advising against opening the drive door during operation.
Lists system components included in the package and optional items for easy installation.
Details processor support, memory slots, USB ports, expansion slots, and power recovery.
Describes the Azalia Codec on-board audio and its stereo sound effects capability.
Lists the available serial, parallel, PS/2 keyboard, and PS/2 mouse ports.
Instructions for removing the upper case by unscrewing and sliding it off the rear panel.
Steps to detach the HDD drive cage by removing a screw and sliding it towards the rear.
Guides on sliding the hard drive into the cage and securing it with screws and cables.
Instructions for installing memory modules, noting the need to remove the optical drive cage first.
Details on removing and reinstalling the power supply unit by unscrewing it from the rear panel.
Steps for installing the CPU, including removing the cooler and protective cap.
Introduction to BIOS, its function, and how to enter the setup menu using the <Del> key.
Setting up the Power Master feature via the Frequency/voltage control in BIOS for different modes.
Configuration of jumper blocks near the riser card slot for HDTV, PCIe, and Riser Card functions.