Safety Precautions
Read and follow the content of the Safety Precautions carefully so that you
will not cause damages to yourself or the system.
1. Pay attention to the warnings and notes in this manual to avoid causing
unexpected damages.
2. If you want to wipe the system with a wet cloth, make sure the power
cord is disconnected. We strongly suggest not to wipe the system with
chemical detergent or sprayed detergent.
3. When moving the system, do not put the system on uneven, unsteady
or slanting surfaces.
4. Do not put water cups or beverages near the PC system to protect the
system from being damaged by liquids.
5. There are ventilating holes on the backboard of the computer case
to dissipate heat from the machine. You should pay attention to the
position of the PC so that the ventilating holes will not be blocked.
Meanwhile, don’t put your PC on something not sturdy enough – like
rug or bed mattress – to ensure smooth air ow for heat dissipation.
6. Before plugging on power, make certain the electric voltage in your
area complies with that of the PC. If you are uncertain, consult your PC
dealer or power company rst.
7. Do not place your PC on power cords. Do not leave the power lines in
tangles which may cause people to stumble.
8. It normally takes several power sockets to meet the need of a PC
system. Make sure the extension power line is capable of handling
the total power load for all equipment. In other words, the combined
amperage of all electrical appliances on the same extension line must
not exceed the strength of electric currents or the fuse of the extension
line.
To Next Page
Loading...
Need help?
General
