Step 4
Turning on power: After completing the preceding steps, reafrm your PC
is connected correctly with peripheral lines for printer, monitor, speaker,
etc. Then you may press the power switch on the front panel of the PC to
activate the machine. Your computer should start operating.
Step 5
Shut down PC properly: When you want to turn off the computer, click the
“Start” button at the left bottom of the PC screen in the operating system
and then click “Shut Down”.
Because the system is delivered as a bare system, a user is offered the
choice to install the CPU, memory module, hard disc drive, or optical disc
drive. In order to install these optional devices, a user needs to know how to
disassemble the system unit. Before disassembling the system unit, a user
needs to get familiarized with the housing.
To Next Page
Loading...
Need help?
General
