0
manual may look slightly different from the BIOS messages, which comes
with your system.
After you turn on the power, you will see the following screen. If you want
to enter BIOS setup menu, press <Del> when POST screen is shown on
your video monitor. If you would like to see the POST screen, you may
press <Tab> key.
Not long after activating the power, you'll see the following screen. Please
press Delete button to get into BIOS. If you would like to see the POST
screen, you may just press Tab button.
After pressing Delete, you'll see the following BIOS setup:
To Next Page
Loading...
Need help?
General
