18
IMAGE
ASPECT RATIO
• Aspect Ratio: Use this function to choose your desired
aspect ratio.
• P2P: The image will be projected in its original
resolution.
• Just Scan: The image will be scaled to fit the whole
screen.
• 16:9: The image will be scaled to fit the screen
anddisplayed using a 16:9 ratio.
• 4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
• Digital Zoom: You can shrink the image by using /
.
• Horizontal Scale: You can narrow the image width by
using / .
• Vertical Scale: You can reduce the image height by
using / .
SOUND
CONTROL
• Sound Mode: There are several factory-preset sound
modes optimized for different audio categories.
• Treble: Adjusts treble level.
• Bass: Adjusts bass level.
EQ
This function allows you adjust the output of different
sound frequencies.
ADVANCED
DISPLAY
• Projection Mode
• Front: The factory default setting.
• Ceiling Front: Turns the image upside down for ceiling-
mounted projection.
• Rear: reverses the image so you can project from behind
a translucent screen.
• Ceiling Rear: turns the image upside down for ceiling-
mounted projection from behind a translucent screen.
• AUTO Rotate: The projector can automatically rotates
the projected image when the projector is placed
upside down.
RESTORE DEFAULTS
Press "ENTER" after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
To Next Page
Loading...
Need help?
General
