AP Diving APV200 - AP50 Hose: Remove Circlip from Connector; AP50 Hose: Remove Sliding Collar

AP Diving Ltd. APV200 Inflator Maintenance Manual
Page 16 of 30
AP50 Medium Pressure (MP) hose disassembly
4.15 Remove circlip from snap connector body
- Use small pliers to remove the circlip from the snap connector body.
- Take care not to widen the circlip, as it will otherwise not be usable again during
assembly.
4.16 Remove sliding collar from snap connector body
- Just pull it off.