AP Diving APV200 - Screw Module Cap onto APV200 Body; Screw Core Valve into Direct Feed Body

AP Diving Ltd. APV200 Inflator Maintenance Manual
Page 24 of 30
CORRECT: legs of breathing module INCORRECT: legs of breathing module
are NOT visible through mouthpiece ARE visible through mouthpiece
6.5 Screw module cap onto APV200 body
- Screw clockwise.
6.6 Screw new core valve into direct feed body
- The core valve needs to be replaced during service.
- Use tool AP50E tool or equivalent to screw the core valve into the feed body.
- Screw clockwise.