Apach E Series - Oven Structure and Controls; Oven Structure Details; Side View Component Labels; Controls and Electric Circuits

EN
60
Hood
Steam
extractor
Steam
consdenser
Valve
manifold
Chamber
Chamber
Steam
generator
Prover
Condensate
drain
Wheel
4.1.1. STRUCTURE
Stainless steel sheet front
Baking chamber of stainless steel sheet
Armored electric heating elements.
Glass door that can resist high temperatures with stainless steel profiles and external handle.
Insulation in rock wool panels, asbestos free door seals in fiber and mixtures and sealants.
Stainless steel sheet outside coating.
Control panel with electronic or electromechanical devices (optional).
Steam generation control by means of electro-valve (optional).
Steam exhaust control of the chamber by means of manual valve
It is fitted with two sets of armored electrical heating elements, one with a provision of the heating of
the sole, the other for the ceiling and one couple just for the heating of the front part (mouth of the
oven).
Side view EDISON
4.1.2. CONTROLS AND ELECTRIC CIRCUITS
Control panel with electronic and electromechanical devices (optional).
Automatic steam generation control, by means of button and electrovalve (optional).
4.1.3. MECHANICAL AND HYDRAULIC CONTROLS
Steam exhaust control of the chamber by means of manual valve