70
TECHNICAL DATA
Lcd display management with blue or white background
Internal clock with maintenance battery
"J" type Thermocouple
Power supply: 230 Vac
INTRODUCTION
This control panel controls:
Temperature inside the baking chamber MAX 280°C (PA e PS) , MAX 350°C (PZ)
Power percentages for Floor, Front and Ceiling (in the % percentages version)
Ceiling and Floor temperatures (in the bi-temperature version)
Baking time (timer with internal buzzer management)
Steam injection time (for those versions with chamber’s steam generators)
Delayed Start (1 or 2 daily start ups for all the days of the week)
30 Automatic programs that can be set as required
Machine parameters (some protected by password that can be accessed only by authorized
technicians).
With the keyboard under the LCD display, it is possible to move the cursor through the various menus,
whereas the selection or confirmation of a menu, or the editing of a parameter is possible by pressing
ENTER button.
Cursor is defined as the position shown on the LCD display, which flashes when its value (hereinafter called
Setpoint) can be changed and is fixed when displayed or confirmed.
To leave the pages and return to the previous menus or pages the cursor must be moved to the first
parameter on the video page and the switch turned to the left until the starting page is displayed.
Program No. “00” is the “Manual” program, while the others up to No. “30” are all automatic program.
To Next Page
Loading...