E-ITN 10
Installation and service manual M2015/04b [EN]
6. ACCOMPANYING DOCUMENTATION
6.1. ORDERING
Order must include Setting protocol that is available on the website for business partners. In every order
following items must be specified:
• quantity
• type
• attach Setting protocol – if column "required value" is empty, default values are set
• spare parts (extra pieces)
• delivery date
• method of transport
Order example: 100 pcs E-ITN E-ITN 10.71, required delivery 28.2.2012, EXW + filled Setting protocol.
6.2. PACKING
Allocators are disassembled and packed in the boxes, packing sheet is included in every box (see Illustration
3: Packing sheet) with mark of the producer, device type, number of items and their serial numbers, packing
date and the name of the operative who checked and packed the products. The lids of boxes are marked
with label "THIS SIDE UP!". The boxes are non-returnable. Boxes are stored always cover up on the
standard shipping pallets.
Electronic heat cost allocator E-ITN 10 is sensitive to static electricity. For this reason, each allocator is
shipped in antistatic packaging. Antistatic package should be removed just before installation.
16 / 39
To Next Page
Loading...
Need help?
General