Apeks Supercritical The Duplex™ Operation Manual
20
Revision Date 8/28/2018
2.2.11.3. Elapsed Time Setting – This Screen can be called up from the bottom middle of the
main screen and allows the operator to change/monitor time settings. In continuous batch
mode the operator will need to go to this screen to verify that extractors are ready to
come online.
2.2.11.4. Recover CO
2
Separator Selection – This window will popup if the system is recovered
by the user before the end of the cycle.
2.2.11.5. Open Extractor Vessel – This window will popup if the operator selects open extractor
on the manual screen.
To Next Page
Loading...